Mystery Bridge Nr. 83: The Twin Bridges Of Salisbury, CT

salisbury ct bridges
Postcard courtesy of Dana and Ray Klein

After some time looking at the mystery bridges in the German state of Saxony, our next Mystery Bridge takes us back to the United States and the community of Salisbury in northwestern Connecticut. With a population of 3655 inhabitants, the town, incorporated in 1741, is part of the New York Metropolitan Region, which encompasses the entire state. Salisbury is laden with many historic buildings dating back to the time of its incorporation, some are listed on the National Register of Historic Places. Because of its proximity to Mount Frissell in Massachusetts, the community is situated on the highest point in the state, with an elevation of 2380 feet above sea level. And lastly, the community has six lakes and several ponds. And with that come many bridges, although in high numbers.

And with the high number of bridges in the community, come the difficulties of finding rare structures and mystery bridges with missing information, like these two bridges in the postcard above.

Posted recently on by Dana and Ray Klein, one can see clearly that the bridge on the left was for pedestrians- on the right for horse and buggy and later, the Model T cars. The setting is around the turn of the century because of their design and appearance. Given the high number of trees and the given facts above, the twin bridges spanned a waterway connecting a pair of lakes and/or ponds. The question here is where exactly the bridge is located.

A closer look at the two bridges show that the material used for construction was clearly iron (most likely, cast iron), for two reasons:

  1. The pedestrian bridge features a curved design, namely curved endposts, and appears to have some artistic designs on the trusses, similar to the ones found at Central Park in New York City. These bridges were built in various areas between 1865 and 1880. It’s unknown what exactly the truss type was given the transversal view in the postcard.
  2. The vehicular bridge featured a Parker pony truss span, using the earliest design by C.H. Parker when it was patented in 1884. The connections were pin-connected, but unlike other regular Parker designs built after 1890, the upper chord consists of eyebar beams built in short lengths per panel with four or five put together. The vertical and diagonal beams are integrated into this mechanism and pins are used to connect all of them. In the picture, you can see how far apart they are, in comparison with conventional pin-connections, whose vertical beams are inserted into the upper chord, and pins are used solely for the diagonal beams. When Parker introduced his design, wrought iron was already being used, even though it was being phased out in favor of steel because of its flexibility and tolerance to heat. From 1890 onwards, all truss bridges were being built using this material. Therefore, because iron was used for circular designs and ornaments, in comparison to steel used for other geometrical shapes, such as rectangular ones, the bridge was built between 1885 and 1890.

Both bridges are long gone, but it would be curious to know the following questions:

  1. Where were the bridges located?
  2. When were the bridges built? The Parker was most likely between 1885 and 1890, while the pedestrian span was built before 1885.
  3. Who built the bridge?
  4. What were the dimensions of the two bridges?  For both, it appears to have the length of between 40 and 70 feet. The pedestrian span had a width of between 10 and 20 feet; the vehicular one, between 15 and 25 feet.
  5. When were they removed? Most likely because of the progressive development of the infrastructure combined with population growth, they were gone before 1960 latest, unless they were relocated. If relocated, where could one see the bridge today?

Do you know about the bridges, then send the author a line or post the information on the Chronicles’ facebook page. You can also comment on, where the postcard came from. In either case, we would like to know more about the structures.

So happy bridgehunting! 🙂